show ingress-replication mvpn
Syntax
show ingress-replication mvpn
Description
Display the state and configuration of the ingress replication tunnels created for the MVPN application when using the mpls-internet-multicast routing instance type.
Required Privilege Level
View
Output Fields
Table 1 lists the output fields for the show ingress-replication
mvpn command. Output fields are listed in the approximate order
in which they appear.
Field Name |
Field Description |
|---|---|
Ingress tunnel |
Identifies the MVPN ingress replication tunnel. |
Application |
Identifies the application (MVPN). |
Unicast tunnels |
List of unicast tunnels in use. |
Leaf address |
Address of the tunnel. |
Tunnel type |
Identifies the unicast tunnel type. |
Mode |
Indicates whether the tunnel was created as a new tunnel for the ingress replication, or if an existing tunnel was used. |
State |
Indicates whether the tunnel is Up or Down. |
Sample Output
show ingress-replication mvpn
user@host> show ingress-replication mvpn
Ingress Tunnel: mvpn:1
Application: MVPN
Unicast tunnels
Leaf Address Tunnel-type Mode State
10.255.245.2 P2P LSP New Up
10.255.245.4 P2P LSP New Up
Ingress Tunnel: mvpn:2
Application: MVPN
Unicast tunnels
Leaf Address Tunnel-type Mode State
10.255.245.2 P2P LSP Existing Up
Release Information
Command introduced in Junos OS Release 10.4.