no-revert (Neighbor Interface)
Syntax
no-revert;
Hierarchy Level
[edit protocols l2circuit neighbor address interfaces interface-name], [edit logical-systems logical-system-name protocols l2circuit neighbor address interfaces interface-name]
Description
(Optional) Prevent the protect interface from reverting to the primary interface.
The protect interface must be configured prior to configuring
the no-revert statement.
Typically, when the primary interface goes down, the pseudowire
starts using the protect interface. By default, when the primary interface
comes back online, the interface is switched-over back from the protect
interface to the primary interface. To prevent the switchover back
to the primary interface, unless the protect interface goes down,
include the no-revert statement. This prevents loss of
traffic during the switchover.
If the protect interface fails, the interface is switched-over
back to the primary interface, irrespective of whether or not the no-revert statement is included in the configuration.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.3.