mesh-group (Protocols VPLS)
Syntax
mesh-group mesh-group-name { interface interface-name; l2vpn-id (as-number:id | ip-address:id); local-switching; mac-flush [ explicit-mac-flush-message-options ]; neighbor address {...}; peer-as all; pseudowire-status-tlv hot-standby-vc-on; route-distinguisher (as-number:id | ip-address:id); vpls-id number; vrf-export [ policy-names ]; vrf-import [ policy-names ]; vrf-target { community; import community-name; export community-name; } }
Hierarchy Level
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls site site-name], [edit routing-instances routing-instance-name protocols vpls], [edit routing-instances routing-instance-name protocols vpls site site-name]
Description
Specify the virtual private LAN service (VPLS) mesh group. The statement options allow you to specify each provider edge (PE) device that is a member of the mesh group. This statement is also used in the configuration of inter-autonomous system (AS) VPLS with media access control (MAC) operations.
You can configure the no-local-switching
option at the
[edit routing-instances
routing-instance-name]
or the [edit logical-systems logical-system-name
routing-instances
routing-instance-name]
hierarchies to disable local switching in
a
routing
instance
with
VPLS.
If you set this option, you can’t set the local-switching
option
under a VPLS mesh group to enable local switching only for a particular VPLS
mesh group. The instance-level no-local-switching
statement
overrides the per-mesh-group local-switching
setting.
Options
mesh-group-name
—Name of the VPLS mesh group.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.0.
local-switching
, mac-tlv-receive
,
mac-tlv-send
, and peer-as
options introduced
in Junos OS Release 9.3.
pseudowire-status-tlv
and mac-flush
options
introduced in Junos OS Release 10.0.
route-distinguisher
, vrf-export
,
vrf-import
, and vrf-target
options introduced
in Junos OS Release 11.2.
hot-standby-vc-on
and interface interface-name
options introduced
in Junos OS Release 15.1R2.