encapsulation-type (Layer 2 Circuits)
Syntax
encapsulation-type (atm-aal5 | atm-cell | atm-cell-port-mode | atm-cell-vc-mode | atm-cell-vp-mode | cesop | cisco-hdlc | ethernet | ethernet-vlan | frame-relay | frame-relay-port-mode | interworking | ppp | satop-e1 | satop-e3 | satop-t1 | satop-t3);
Hierarchy Level
[edit logical-systems logical-system-name protocols l2circuit local-switching interface interface-name], [edit logical-systems logical-system-name protocols l2circuit neighbor address interface interface-name], [edit protocols l2circuit local-switching interface interface-name], [edit protocols l2circuit neighbor address interface interface-name]
Description
Specify the type of Layer 2 traffic transiting the Layer 2 circuit.
Options
atm-aal5—ATM Adaptation Layer (AAL/5)
atm-cell—ATM cell relay
atm-cell-port-mode—ATM cell relay port promiscuous
mode
atm-cell-vc-mode—ATM VC cell relay nonpromiscuous
mode
atm-cell-vp-mode—ATM virtual path (VP) cell
relay promiscuous mode
cesop—CESOP-based Layer 2 circuit
cisco-hdlc—Cisco Systems–compatible HDLC
ethernet—Ethernet
ethernet-vlan—Ethernet VLAN
frame-relay—Frame Relay
frame-relay-port-mode—Frame Relay port mode
interworking—Layer 2.5 interworking
ppp—PPP
satsop-e1—SATSOP-E1-based Layer 2 circuit
satsop-e3—SATSOP-E3-based Layer 2 circuit
satsop-t1—SATSOP-T1-based Layer 2 circuit
satsop-t3—SATSOP-T3-based Layer 2 circuit
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.2.