automatic-site-id
Syntax
automatic-site-id {
collision-detect-time seconds;
new-site-wait-time seconds;
reclaim-wait-time minimum seconds maximum seconds;
startup-wait-time seconds;
}
Hierarchy Level
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls site site-name], [edit routing-instances routing-instance-name protocols vpls site site-name]
Description
Enable automatic site identifiers for VPLS routing instances.
When you configure automatic-site-id for the first
time, you must deactivate and then activate protocol vpls. However, if you already have automatic-site-id configured,
you do not need to deactivate and then activate protocol vpls.
Options
collision-detect-time—The time
in seconds to wait after a claim advertisement is sent to the
other routers in a VPLS instance before a PE router can begin using
a site identifier. If the PE router receives a competing claim advertisement
for the same site identifier during this time period, it initiates
the collision resolution procedure for site identifiers.
In the VPLS documentation, the word router in terms such as PE router is used to refer to any device that provides routing functions.
new-site-wait-time—The time in seconds to wait to receive VPLS information for a newly configured routing instance or a new site. This time interval is also applied whenever the automatic site identifier feature is activated on a VPLS routing instance other than at startup. Effectively, this timer indicates how long to wait before an attempt is made to allocate a site identifier. This timer is also triggered whenever a VPLS routing instance is enabled.
reclaim-wait-time—The time in seconds to wait to receive VPLS information for a newly configured routing instance or a new site. This time interval is also applied whenever the automatic site identifier feature is activated on a VPLS routing instance other than at startup. Effectively, this timer indicates how long to wait before an attempt is made to allocate a site identifier. This timer is also triggered whenever a VPLS routing instance is enabled. You can configure two values for this option: the minimum wait time and the maximum wait time.
startup-wait-time—The time in seconds to wait at startup to receive all the VPLS information for the route targets configured on the other PE routers included in the VPLS routing instance.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.1.