Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

power-mode-ipsec

Syntax

Hierarchy Level

Description

Enable PowerMode IPsec. processing. PMI is a new mode of operation that provides IPsec performance improvements.

For SRX4100, SRX4200 devices running Junos OS Release 18.4R1, SRX4600 devices running Junos OS Release 20.4R1, and vSRX Virtual Firewall instances running Junos OS Release 18.3R1, you can enable or disable the PMI. Starting in Junos OS Release 21.1R1, you can enable or disable the PMI on MX-SPC3 services card.

If you use Junos OS Release 18.3R1, you must reboot the device for the configuration to take effect.

From Junos OS Release 18.4R1 and later, you don’t need reboot the device after enabling or disabling this feature.

Packets cannot go through the PMI when firewall or advanced security services are combined with IPsec. Hence, PMI must not be used when firewall or advanced security services are combined with IPsec.

Required Privilege Level

flow-tap

Release Information

Statement introduced in Junos OS Release 18.3R1.