Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

ingress (Buffer Configuration)

Syntax

Hierarchy Level

Description

Configure the global shared buffer pool allocation for ingress traffic. The system allocates the shared buffer pool dynamically across its ports as the ports require memory space. Some buffer space is reserved for buffers such as dedicated buffers (buffers allocated permanently to ports) and headroom buffers (buffers that help prevent packet loss on lossless flows).

The percentage you specify is the percentage of available (user-configurable) buffer space allocated to the global shared ingress buffer pool. If you allocate less than 100 percent of the available buffer space to the shared buffer pool, the remaining buffer space is added to the dedicated buffer pool. (You cannot directly configure the dedicated buffer pool for each port; dedicated buffers are allocated evenly across all the ports.)

CAUTION:

Changing the buffer configuration is a disruptive event. Traffic stops on all ports until buffer reprogramming is complete.

You can also partition the shared buffer pool to adjust the ingress buffer allocations for different mixes of network traffic using the buffer-partition statement.

Default

The default shared buffer percentage is 100 percent. (All available buffer space is allocated to the shared buffer pool.)

Options

percent percent—Percentage of available ingress buffer space allocated to the shared buffer pool. If the percentage is less than 100 percent, the remaining buffer space is allocated to the dedicated buffer pool.

The remaining statement is explained separately. See CLI Explorer.

Required Privilege Level

interfaces—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 12.3.