Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show class-of-service traffic-control-profile

Syntax

Description

For Gigabit Ethernet IQ PICs, Channelized IQ PICs, EQ DPCs, and MPC/MIC interfaces only, display traffic shaping and scheduling profiles.

(ACX Series routers) For ATM IMA pseudowire interfaces, display traffic shaping and scheduling profiles.

Options

none

Display all profiles.

profile-name

(Optional) Display information about a single profile.

Required Privilege Level

view

Output Fields

Table 1 describes the output fields for the show class-of-service traffic-control-profile command. Output fields are listed in the approximate order in which they appear.

Table 1: show class-of-service traffic-control-profile Output Fields

Field Name

Field Description

Traffic control profile

Name of the traffic control profile.

(Enhanced subscriber management for MX Series routers) The name of the dynamic traffic control profile object is associated with a generated UID (for example, TC_PROF_100_199_SERIES_UID1000) instead of with a subscriber interface.

Index

Index number of the traffic control profile.

(Enhanced subscriber management for MX Series routers) Index values for dynamic CoS traffic control profiles are larger for enhanced subscriber management than they are for legacy subscriber management.

ATM Service

(MX Series routers with ATM Multi-Rate CE MIC) Configured category of ATM service. Possible values:

  • cbr—Constant bit rate.

  • rtvbr—Real time variable bit rate.

  • nrtvbr—Non real time variable bit rate.

  • ubr—Unspecified bit rate.

Maximum Burst Size

Configured maximum burst size, in cells.

Peak rate

Configured peak rate, in cps.

Sustained rate

Configured sustained rate, in cps.

Shaping rate

Configured shaping rate, in bps.

Note:

(MX Series routers with ATM Multi-Rate CE MIC) Configured peak rate, in cps.

Shaping rate burst

Configured burst size for the shaping rate, in bytes.

Note:

(MX Series routers with ATM Multi-Rate CE MIC) Configured maximum burst rate, in cells.

Shaping rate priority high

Configured shaping rate for high-priority traffic, in bps.

Shaping rate priority medium

Configured shaping rate for medium-priority traffic, in bps.

Shaping rate priority low

Configured shaping rate for low-priority traffic, in bps.

Shaping rate excess high

Configured shaping rate for high-priority excess traffic, in bps.

Shaping rate excess low

Configured shaping rate for low-priority excess traffic, in bps.

Scheduler map

Name of the associated scheduler map.

(Enhanced subscriber management for MX Series routers) The name of the dynamic scheduler map object is associated with a generated UID (for example, SMAP-1_UID1002) instead of with a subscriber interface.

Delay Buffer rate

Configured delay buffer rate, in bps.

Excess rate

Configured excess rate, in percent or proportion.

Excess rate high

Configured excess rate for high priority traffic, in percent or proportion.

Excess rate low

Configured excess rate for low priority traffic, in percent or proportion.

Guaranteed rate

Configured guaranteed rate, in bps or cps.

Note:

(MX Series routers with ATM Multi-Rate CE MIC) This value depends on the ATM service category chosen. Possible values:

  • cbr—Guaranteed rate is equal to the configured peak rate in cps.

  • rtvbr—Guaranteed rate is equal to the configured sustained rate in cps.

  • nrtvbr—Guaranteed rate is equal to the configured sustained rate in cps.

Guaranteed rate burst

Configured burst size for the guaranteed rate, in bytes.

adjust-minimum

Configured minimum shaping rate for an adjusted queue, in bps.

overhead accounting mode

Configured shaping mode: Frame Mode or Cell Mode.

Overhead bytes

Configured byte adjustment value.

Adjust parent

Configured shaping-rate adjustment for parent scheduler nodes. If enabled, this field appears.

flow-aware indicates that the parent scheduler node is adjusted only once per multicast channel.

Sample Output

show class-of-service traffic-control-profile

show class-of-service traffic-control-profile (MX Series routers with Clear Channel Multi-Rate CE MIC)

show class-of-service traffic-control-profile (ACX Series routers with ATM IMA pseudowire interfaces)

show class-of-service traffic-control-profile (Enhanced Subscriber Management)

Release Information

Command introduced before Junos OS Release 7.4.