signal-type
Syntax
signal-type (1hz | 5mhz | 10mhz | 2048mhz | e1 | t1);
Hierarchy Level
[edit chassis synchronization interfaces external] [edit chassis synchronization interfaces (external-0/0 | external-1/0)]
Description
Configure the frequency for the provided reference clock.
Options
1mhz |
Set the signal with a clock frequency of 1 MHz. |
5mhz |
Set the signal with a clock frequency of 5 MHz. |
10mhz |
Set the signal with a clock frequency of 10 MHz. |
2048khz |
Set the signal as an E1 unframed 2048 kHz G.703 signal. |
e1 |
Set the signal as an E1-coded 2048-kHz signal on a 120-ohm balanced line. |
t1 |
Set the signal as a T1-coded 1.544-MHz signal on a 100-ohm balanced line. |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.3.