max-transmit-quality-level

Syntax

Hierarchy Level

Description

Configure the threshold quality level for the router. If the received quality level is below the threshold quality level, then the router will send out a received quality level of SEC. The available quality levels are listed in Table 1.

Note:

For GPS external output, when you configure the maximum transmit quality level as PRC and the router is rebooted, no valid output is obtained from SCBE. However, when the maximum transmit quality level is configured to any other quality level other than PRC and the router gets rebooted, then the SCBE works normally.

Options

quality-level

The available quality levels are as given in Table 1.

Table 1: Quality Levels
Quality Level	Description
prc	Timing quality of a primary reference clock (option-1 only).
prs	Clock traceable to a primary reference source (option-2 only).
sec	Timing quality of an SDH equipment clock (option-1 only).
smc	Clock traceable to a self-timed SONET (option-2 only).
ssu-a	Timing quality of a type I or IV client clock (option-1 only).
ssu-b	Timing quality of a type VI client clock (option-1 only).
st2	Clock traceable to Stratum 2 (option-2 only).
st3	Clock traceable to Stratum 3 (option-2 only).
st3e	Clock traceable to Stratum 3E (option-2 only).
st4	Clock traceable to Stratum 4 free-run (option-2 only).
stu	Clock traceable to an unknown quality (option-2 only).
tnc	Clock traceable to a transit node clock (option-2 only).

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 12.3.

ON THIS PAGE