show ntp associations
Syntax
show ntp associations <no-resolve>
Description
Display Network Time Protocol (NTP) peers and their state.
Options
none | Display NTP peers and their state. |
no-resolve | (Optional) Suppress symbolic addressing. |
Required Privilege Level
view
Output Fields
Table 1 describes
the output fields for the show ntp associations
command.
Output fields are listed in the approximate order in which they appear.
Field Name |
Field Description |
---|---|
|
Address or name of the remote NTP peer. Status of the peer in the clock selection process:
|
|
Reference identifier of the remote
peer. If the reference identifier is not known, this field shows a
value of |
auth |
Display the authentication method used for the peers. |
|
Stratum of the remote peer. |
|
Type of peer: |
|
When the last packet from the peer was received. |
|
Polling interval, in seconds. |
|
Reachability register, in octal. |
|
Current estimated delay of the peer, in milliseconds. |
|
Current estimated offset of the peer, in milliseconds. |
|
Current estimated dispersion of the peer, in milliseconds. |
Sample Output
show ntp associations
<user@host>show ntp associations remote refid auth st t when poll reach delay offset jitter ============================================================================== 10.1.1.1 169.254.0.1 NTS 3 - - 64 377 0.518 -23.378 1.520 *20.1.1.1 169.254.0.1 - 3 - - 64 377 0.518 -23.378 1.520
Release Information
Command introduced before Junos OS Release 7.4.