set date
Syntax
set date (date-time ntp <key authentication-key number> <servers> <source-address source-address>)
Description
Set the date and time.
Options
date-time | Date and time. Enter this string inside quotation marks. |
ntp | Use a Network Time Protocol (NTP) server to synchronize the current date and time setting on the router or switch. |
key authentication-key number | (Optional) Specify a key number to authenticate
the NTP server used to synchronize the date and time. You must specify
the same key number used to authenticate the server configured at
the |
servers | (Optional) Specify the IP address of one or more NTP servers. |
source-address source-address | Specify the source address that the router or switch uses to contact the remote NTP server. |
Required Privilege Level
view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
set date
user@host> set date ntp 21 Apr 17:22:02 ntpdate[3867]: step time server 172.17.27.46 offset 8.759252 sec
Release Information
Command introduced before Junos OS Release 7.4.
key
option introduced in Junos OS Release 12.1R2