Configuring Static Customer VLANs for the PPPoE Layer 3 Wholesale Network Solution
In this example configuration, the access interface (ge-9/3/0
) connects to a device (that is, a DSLAM) on the access side of the
network. You can define static customer VLANs (C-VLANs) for use by
the wholesaler and any access network subscribers.
To configure the customer VLANs:
Edit the access side interface.
[edit] user@host# edit interfaces ge-9/3/0
Specify the use of flexible VLAN tagging.
[edit interfaces ge-9/3/0] user@host# set flexible-vlan-tagging
Edit the interface unit for the wholesaler VLAN.
[edit interfaces ge-9/3/0] user@host# edit unit 14
Specify the type of encapsulation that you want the wholesaler VLAN to use.
[edit interfaces ge-9/3/0 unit 14] user@host# set encapsulation ppp-over-ether
(Optional) Specify that you want the wholesaler VLAN to use Proxy ARP.
[edit interfaces ge-9/3/0 unit 14] user@host# set proxy-arp
Define a unique VLAN ID for the wholesaler VLAN.
[edit interfaces ge-9/3/0 unit 14] user@host# set vlan-id 14
Specify the dynamic profile that you want the wholesaler VLAN to use.
[edit interfaces ge-9/3/0 unit 14] user@host# set pppoe-underlying-options dynamic-profile PPPoE_Wholesaler_Profile