Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring Separate Routing Instances for PPPoE Service Retailers

As the owner of the system, the wholesaler uses the default routing instance. You must create separate routing instances for each individual retailer to keep routing information for individual retailers separate and to define any servers and forwarding options specific to each retailer.

To define a retailer routing instance:

  1. Create the retailer routing instance.
  2. Specify the routing instance type for the retailer.
  3. Specify the access profile that you want the routing instance to use.
  4. Specify the interface that faces the Retailer1 RADIUS server.
  5. Specify the loopback interface unit for this routing instance.
    Note:

    Loopback interfaces must be unique for each routing instance.

  6. Specify an identifier to distinguish the VPN to which the route belongs.
  7. Specify how routes are imported into the local PE router’s VPN routing table from the remote PE router.
  8. Specify which routes are exported from the local instance table to the remote PE router.
  9. Repeat this procedure for other retailers.