Static Subscriber Interfaces and VLAN Overview
This topic describes the topology for configuring subscriber interfaces over static VLAN interfaces.
In a dynamic profile, you can configure VLAN subscriber interfaces over the following statically created logical interface types:
GE—Gigabit Ethernet
XE—10-Gigabit Ethernet
AE—Aggregated Ethernet
We recommend that you configure each subscriber on a statically created VLAN.
Figure 1 shows an example of subscriber interfaces on an individual VLAN.
Figure 1: VLAN Subscriber Interfaces
You can further separate VLANs on subscriber interfaces by configuring a VLAN interface as the underlying interface for a set of IP demux interfaces.