Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show pppoe statistics

Syntax

Description

Display statistics information about PPPoE interfaces.

Options

none

Display PPPoE statistics for all interfaces.

logical-interface-name

(Optional) Name of a PPPoE underlying logical interface.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show pppoe statistics command. Output fields are listed in the approximate order in which they appear.

Table 1: show pppoe statistics Output Fields

Field Name

Field Description

Active PPPoE sessions

Total number of active PPPoE sessions and the number of packets sent and received during the PPPoE session, categorized by packet type and packet errors:

  • PADI—PPPoE Active Discovery Initiation packets.

  • PADO—PPPoE Active Discovery Offer packets.

  • PADR—PPPoE Active Discovery Request packets.

  • PADS—PPPoE Active Discovery Session-Confirmation packets.

  • PADT—PPPoE Active Discovery Termination packets.

  • Service name error—Packets for which the Service-Name request could not be honored.

  • AC system error—Packets for which the access concentrator experienced an error in performing the host request. For example, the host had insufficient resources to create a virtual circuit.

  • Generic error—Packets that indicate an unrecoverable error occurred.

  • Malformed packets—Malformed or short packets that caused the packet handler to discard the frame as unreadable.

  • Unknown packets—Unrecognized packets.

Timeouts

Information about timeouts that occurred during the PPPoE session (not displayed for M120, M320, and MX Series routers):

  • PADI—No PADR packet has been received within the timeout period. (This value is always zero and is not supported.)

  • PADO—No PPPoE Active Discovery Offer packet has been received within the timeout period.

  • PADR—No PADS packet has been received within the timeout period.

Sample Output

show pppoe statistics

show pppoe statistics (For the Specified Underlying Interface Only)

Release Information

Command introduced before Junos OS Release 7.4.

logical-interface-name option introduced in Junos OS Release 10.1.