Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

vdsl2-overhead-adjust

Syntax

Hierarchy Level

Description

Adjust the actual downstream rate for a VDSL2 access line received in the ANCP Port Up message by multiplying the rate by the specified percentage. The ANCP agent reports the adjusted rate to CoS.

Note:

Starting in Junos OS Release 17.4R1, this statement is deprecated and replaced by the vdsl2-overhead-adjust option of the access-line statement at the [edit system] hierarchy level. The ANCP agent ignores the vdsl2-overhead-adjust statement if it is present. This means that when you upgrade from Junos OS Release 17.3 or earlier with an existing configuration, you must reconfigure your adjustment with the access-line statement.

Options

percentage

Percentage by which to multiply the rate.

  • Range: 80 through 100 percent

  • Default: 100 percent

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 14.2.

Statement deprecated in Junos OS Release 17.4R1.

Related Documentation

Change History Table

Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.

Release
Description
17.4R1
Starting in Junos OS Release 17.4R1, this statement is deprecated and replaced by the vdsl2-overhead-adjust option of the access-line statement at the [edit system] hierarchy level.