send-network-family-indicator (PCRF Partition)
Syntax
send-network-family-indicator;
Description
Include the Juniper-Network-Family-Indicator AVP into its message requests. In many cases, wireline subscribers support only one IP family, which is required information for both AAA service and Policy Control and Charging Rules Function (PCRF). To indicate this information, the Juniper-Network-Family-Indicator AVP has been allocated from the Juniper Vendor-ID space (2636) VSA in Table 1.
AVP Name |
Vendor-ID |
AVP Type |
Diameter Type |
Diameter Flag |
|---|---|---|---|---|
Juniper-Network-Family-Indicator |
2636 |
10010 |
Enum |
V |
The client system (router) sends the Juniper-Network-Family-Indicator AVP to indicate which network families are associated with the service request and supported by the subscriber. When you configure the Juniper-Network-Family-Indicator AVP to indicate the associated network family, the system sends the information to the PCRF. The Juniper-Network-Family-Indicator attribute has four values:
UNSPECIFIED (0)
IPV4_FAMILY (1)
IPV6_FAMILY (2)
IPV4_IPV6_FAMILY (3)
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 16.2.