active-leasequery (DHCP Local Server)
Syntax
active-leasequery {
topology-discovery;
peer-address {
address;
}
timeout timeout;
idle-timeout idle-timeout;
}Hierarchy Level
[edit system services dhcp-local-server]
[edit system services dhcp-local-server dhcpv6]
Description
Subscriber redundancy on DHCP server focuses on subscriber synchronization between the peer servers using active leasequery. If you configure actiive leasequery for the DHCP server, the peer servers establishes TCP connection and sends active leasequery.
Options
| idle-timeout idle-timeout |
Configure the idle time out value in seconds for the connection between the peer servers.
|
| peer-address address |
Configure IPv4 or IPv6 address of the peer DHCP servers. You can configure maximum five IP addresses. |
| timeout timeout |
Configure the TCP read/write block timeout vlue to terminate and restart the TCP connection.
|
| topology-discovery |
Enable the topology discovery option. |
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 21.4R1.