show network-access aaa subscribers session-id

Type and Client type

Type of client.

Accounting

Status of the accounting configuration for the service, on or off, and the type of accounting, time, volume+time, or flat-file.

The time and volume+time types are configured in RADIUS Service-Statistics VSA [26-69].

Service type

Type of accounting: volume, time, volume+time, or na.

Quota

Quota for service: volume (in Mbps) or time (seconds).

Username

Name of the user logged in to the session.

Stripped username

Username after the domain has been removed.

Logical system/Routing instance and AAA Logical system/Routing instance

Name of the routing instance, logical system name, or both used for the session.

Target Logical system/Routing instance

Logical system/routing instance to which the session is mapped.

Access-profile

Access profile used for AAA services for the session.

Session ID

ID of the subscriber session.

The session ID value displayed under Service name is the service session ID.

Accounting Session ID

ID of the accounting session (RADIUS attribute 44). The ID appears in decimal or description format, as specified by the accounting-session-id-format statement.

Multi Accounting Session ID

Bundle ID for MLPPP sessions. Acct-Multi-Session-Id (RADIUS attribute 50) uses the value of the session database bundle session ID to enable RADIUS to link together multiple related sessions. The value of this field is zero when no MLPPP sessions exist.

IP Address

IP address of the subscriber. For a single-session dual stack, addresses of both IPv4 and IPv6 clients are displayed.

IPv6 Address

IPv6 address of the subscriber. For a single-session dual stack, addresses of both IPv4 and IPv6 clients are displayed.

IPv6 Prefix

IPv6 prefix of the subscriber. For a single-session dual stack, addresses of both IPv4 and IPv6 clients are displayed.

Authentication State

State of the subscriber authentication session: AuthInit, AuthStart, AuthChallenge, AuthRedirect, AuthClntRespWait, AuthAcctVolStatsAckWait, AuthAcctStopAckWait, AuthServCreateRespWait, AuthLogoutStart, AuthStateActive, AuthClntLogoutRespWait, AuthProfileUpdateWait, AuthProvisionRespWait, AuthProvisionServiceCreationWait

Gx-Plus Provisioning State

State of Gx-Plus provisioning:

• ignored—Subscriber has no IPv4 address or NAS-Port-ID.

• in-progress—Provisioning is in progress.

• logout—Subscriber logout is in progress.

• logout-done—Logout response has been received.

• response-received—Provisioning response has been received.

Pcrf Provisioning State

State of PCRF provisioning:

• active—PCRF provisioning is active.

• ignored—Subscriber has no IPv4 address or NAS-Port-ID.

• in-progress—Provisioning is in progress.

• logout—Subscriber logout is in progress.

• logout-done—Logout response has been received.

• response-received—Provisioning response has been received.

Pcrf Subscription-Id-Type

Type of subscriber for a PCRF partition. You can define your own or use a predefined value: 0 (END_USER_E164), 1 (END_USER_IMSI), 2 (END_USER_SIP_URI), 3 (END_USER_NAI), 4 (END_USER_PRIVATE).

Pcrf Subscription-Id-Data

Subscriber data string concatenated from a list of user-selected data options used to identify the subscriber type for a PCRF partition; for example, demux0

Ocs Subscription-Id-Type

Type of subscriber for an OCS partition. You can define your own or use a predefined value: 0 (END_USER_E164), 1 (END_USER_IMSI), 2 (END_USER_SIP_URI), 3 (END_USER_NAI), 4 (END_USER_PRIVATE).

Ocs Subscription-Id-Data

Subscriber data string concatenated from a list of user-selected data options used to identify the subscriber type for an OCS partition; for example: test-sid

Ocs Interrogation State

State of the OCS interrogation: first, intermediate, final.

Ocs Data State

State of the OCS data: none

Accounting State

State of the subscriber accounting session: Acc-Init, Acc-Start-Sent, Imm-Update-Stats-Pending, Acc-Interim-Sent, Acc-Stop-Stats-Pending, Acc-Stop-Sent, Acc-Stop-On-Fail-Deny-Sent, Acc-Stop-Ackd

Provisioning-type

Provisioning type for this session:

• gx-plus—Subscriber service uses Gx-Plus provisioning.

• jsrc—Subscriber service uses JSRC provisioning.

• none—Provisioning is not enabled.

Service name

Name of the attached service or policy.

• For RADIUS-activated and CLI-activated services, displays the full activation string for the service. If the activation string includes service parameters, then both the service name and service parameters are displayed.

• For JSRC-activated policies—displays the policy name.

Service State

State of the service provided in the subscriber session.

Service Family

Network family of the service provided in the subscriber session.

Service Activation Source

Source used to activate the service.

Session uptime

How long the session has been up, in HH:MM:SS.

Service CC-Service-Identifier

Data identification element of the 3GPP Diameter credit control service charging system that uniquely defines the CC-Service-Context.

Service Rating-Group

Value associated with a charging rule and part of the accounting data stream for the PCRF.

Ocs Control

Whether OCS controls the service: yes or no.

Accounting status

Status of the accounting configuration for the service, on or off, and the type of accounting, time, volume+time, or flat-file.

The time and volume+time types are configured in RADIUS Service-Statistics VSA [26-69].

Service accounting session ID

ID of the service accounting session; RADIUS Acct-Session-Id attribute (44). The ID appears in decimal or description format, as specified by the accounting-session-id-format statement.

Service accounting state

State of the service accounting session: Acc-Init, Acc-Start-Sent, Imm-Update-Stats-Pending, Acc-Interim-Sent, Acc-Stop-Stats-Pending, Acc-Stop-Sent, Acc-Stop-On-Fail-Deny-Sent, Acc-Stop-Ackd

Accounting interim interval

Amount of time between interim accounting updates for this service, in seconds; RADIUS Service-Interim-Acct-Interval VSA [26-140] or Diameter Acct-Interim-Interval AVP (85).

Pcrf session-stamp

Value that consists of the UTC time when the router creates the CCR-GX-I. The router appends the session stamp to the session ID when a CCR packet is sent to the PCRF. You configure the use-session-stamp option at the [edit access pcrf partition partition-name hierarchy level. If you do not configure this option, the field displays a value of zero. For local reinitialization, you must configure the use-session-stamp option.