Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

request dhcpv6 server reconfigure

Syntax

Description

Initiate reconfiguration processing for the specified DHCPv6 clients if they are in the bound state. If the clients are in the reconfiguring state, this command has no effect. If the clients are in any state other than bound or reconfiguring, this command has the same effect as the clear dhcpv6 server binding command.

When the local server state machine starts the reconfiguration process on a bound client, the client transitions to the reconfigure state and the local server sends a reconfigure message to the client. Because the client was in the bound state before entering the reconfiguring state, all subscriber (or DHCP client) services, such as forwarding and statistics, continue to work. An exponential back-off timer determines the interval at which the reconfigure message is sent. If the final attempt is unsuccessful, the client is returned to its original state by default. You can optionally include the clear-on-abort statement to configure the client to be cleared when reconfiguration fails.

Options

all

Initiate reconfiguration for all DHCPv6 clients.

address

Initiate reconfiguration for DHCPv6 client with the specified IPv6 address.

client-id

Initiate reconfiguration for DHCPv6 client with the specified client ID.

interface interface-name

Initiate reconfiguration for all DHCPv6 clients on this logical interface (clients whose initial login requests were received over the specified interface).

logical-system logical-system-name

Initiate reconfiguration for all DHCPv6 clients on the specified logical system.

routing-instance routing-instance-name

Initiate reconfiguration reconfigured for all DHCPv6 clients in the specified routing instance.

session-id

Initiate reconfiguration for DHCPv6 client with the specified session ID.

Required Privilege Level

view

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

request dhcpv6 server reconfigure

Release Information

Command introduced in Junos OS Release 10.4.