Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

request dhcpv6 relay leasequery

Syntax

Description

Initiate a leasequery operation to update the binding information for a specific subscriber by requesting that the DHCPv6 relay agent send the leasequery message to the configured DHCP servers. The DHCP leasequery feature must be configured on the DHCPv6 relay agent. If you do not specify a server-address or server-group, then the query is sent to all DHCP servers known to the relay agent.

Options

Note:

You must configure at least one of client-id or ipv6-prefix.

client-id

Use the DHCPv6 Client ID option (option 1) to identify the client whose binding information is requested.

ipv6-prefix

Use the IPv6 prefix to identify the client whose binding information is requested.

logical-system logical-system-name

Specify an optional logical system for the DHCPv6 servers being queried. The default logical system is used by default.

routing-instance routing-instance-name

Specify an optional routing instance for the DHCPv6 servers being queried. The default routing instance is used by default.

server-address server-address

Specify the IPv6 address of the DHCPv6 local server to query.

server-group group-name

Specify the name of a group of DHCPv6 local servers to query.

Required Privilege Level

view

Output Fields

When you enter this command, DHCPv6 relay agent initiates the leasequery operation.

Sample Output

request dhcpv6 relay leasequery

Release Information

Command introduced in Junos OS Release 16.1.