Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

request vmhost reboot

Syntax

Description

Reboot both the Junos OS and the host OS running on the device.

Options

none—Reboot the device software immediately.

disk1

(Optional) Reboot both Junos OS and the host OS on the Routing Engine and boot the Routing Engine from the primary disk.

disk2

(Optional) Reboot both Junos OS and the host OS on the Routing Engine and boot the Routing Engine from backup disk.

network

(Optional) Reboot both Junos OS and the host OS on the Routing Engine and boot the Routing Engine from network by using the PXE boot method.

re0 | re1

(Optional) On routers that support dual or redundant Routing Engines, reboot both Junos OS and the host OS on the Routing Engine in slot 0 (re0) or on the the Routing Engine in slot 1 (re1).

routing-engine

(Optional) Specify the Routing Engine on which Junos OS and the host OS are to be rebooted. The following options are available:

Note:

The QFX10002-60C and PTX10002-60C devices do not have primary and backup routing engines.

  • backup—Backup Routing Engine.

  • both—Both Routing Engines.

  • local—Routing Engine on the local Virtual Chassis member.

  • master—Primary Routing Engine.

  • other—If you issue the command from the primary Routing Engine, the backup Routing Engine is referred to as the other Routing Engine.

usb

(Optional) Reboot both Junos OS and the host OS on the Routing Engine using the USB installation media.

Required Privilege Level

maintenance

Sample Output

request vmhost reboot

Release Information

Command introduced in Junos OS Release 15.1F3.

Note:

PTX3000 router supports the Routing and Control Board, RCBPTX.