Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Enabling Direct PCC Rule Activation by a PCRF for Subscriber Management

Note:

Starting in Junos OS Release 19.3R1, direct PCC rule activation by a PCRF is also supported if you enable Next Gen Services on the router with the MX-SPC3 card.

Enable direct PCRF activation of PCC rules by configuring a PCRF partition, a Diameter instance, and a PCC context in an access profile.

  1. Configure the Diameter instance. See Configuring Diameter.
  2. Configure the PCRF partition. See Configuring the PCRF Partition.
  3. Enable PCRF provisioning in the access profile.
  4. Assign a PCEF profile to the access profile PCC context.
  5. Specify the IPv6 input service set that handles application-aware policy control.
  6. (Optional) Specify a service filter for the IPv6 input service set to identify conditions for which you want to skip application-aware policy control.
  7. Specify the IPv4 input service set that handles application-aware policy control.
  8. (Optional) Specify a service filter for the IPv4 input service set to identify conditions for which you want to skip application-aware policy control.
  9. Specify the IPv6 output service set that handles application-aware policy control.
  10. (Optional) Specify a service filter for the IPv6 output service set to identify conditions for which you want to skip application-aware policy control.
  11. Specify the IPv4 output service set that handles application-aware policy control.
  12. (Optional) Specify a service filter for the IPv4 output service set to identify conditions for which you want to skip application-aware policy control.

Related Documentation