Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

ssm-map-policy (Dynamic IGMP Interface)

Syntax

Hierarchy Level

Description

Apply an SSM map policy to a dynamic IGMP interface. SSM mapping translates IGMPv1 and IGMPv2 membership reports to an IGMPv3 report, which enables hosts running IGMPv1 or IGMPv2 to participate in SSM. The map policy associates the group addresses to be translated with the source addresses where the group addresses are found. You configure the SSM map policy with the policy-statement statement at the [edit policy-options] hierarchy level.

For statically-configured IGMP interfaces, use the ssm-map-policy (IGMP) statement.

Starting in Junos OS Release 16.1R5, 16.2R3, 17.1R3, 17.2R2, and 17.3R1, use this statement instead of the ssm-map statement to associate the policy with the dynamic IGMP interface for all releases with enhanced subscriber management. Starting in Junos OS Release 16.1R5, 16.2R3, 17.1R3, and 17.2R2, the ssm-map statement is deprecated and no longer supported. Starting in Junos OS Release 17.3R1, the statement is removed from the CLI.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 16.1R5.

Release History Table
Release
Description
16.1R5
Starting in Junos OS Release 16.1R5, 16.2R3, 17.1R3, 17.2R2, and 17.3R1, use this statement instead of the ssm-map statement to associate the policy with the dynamic IGMP interface for all releases with enhanced subscriber management.