Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

local-port-range

Syntax

Hierarchy Level

Description

Specify the port range to identify the subscriber traffic that you want the service data flow (SDF) filter to detect.

Note:

You can specify either local-port-range or a list of ports with local-ports, but not both.

If you are using Junos OS Subscriber Aware, specify the port range at the [edit unified-edge pcef flow-descriptions flow-identifier] hierarchy level.

If you are using Junos OS Broadband Subscriber Management, specify the port range at the [edit services pcef flow-descriptions flow-identifier] hierarchy level.

Default

If the local-port-range statement is not configured, the default is any range of local ports.

Options

low-value

Lower boundary for the port range.

  • Range: 1 through 65,535

high-value

Upper boundary for the port range.

  • Range: 1 through 65,535

Required Privilege Level

For Junos OS Subscriber Aware:

unified-edge—To view this statement in the configuration.

unified-edge-control—To add this statement to the configuration.

For Junos OS Broadband Subscriber Management:

services—To view this statement in the configuration.

services–control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 17.1.

Support at the [edit services pcef flow-descriptions flow-identifier] hierarchy level introduced for Junos OS Broadband Subscriber Management in Junos OS Release 17.2 on MX Series.