frame-mode (Dynamic Traffic Shaping)
Syntax
frame-mode (bytes | $junos-cos-byte-adjust | frame-mode-bytes frame-mode-bytes |$junos-cos-byte-adjust-frame);
Hierarchy Level
[edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name overhead-accounting], [edit class-of-service traffic-control-profiles profile-name overhead-accounting],
Description
Configure the mode to shape downstream ATM traffic based as frames.
Default
The default is frame-mode.
Options
bytes |
Byte adjustment value for the |
$junos-cos-byte-adjust |
Predefined variable for byte adjustment that is replaced with a value obtained from the RADIUS server when a subscriber authenticates over the interface to which the dynamic profile is attached. |
frame-mode-bytes frame-mode-bytes |
Overhead bytes when in frame-mode. Traffic shaping is based on the number of bytes in the frame, without regard to cell encapsulation or padding overhead. |
$junos-cos-byte-adjust-frame |
Predefined variable for frame mode shaping. This variable can not be used when the
|
We recommend using the frame-mode-bytes frame-mode-bytes option rather than the bytes option.
If you specify a value for the bytes bytes option, you cannot specify a value for either the frame-mode-bytes option.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.2.
Variable $junos-cos-byte-adjust-frame introduced in Junos OS Release 13.1.