show services service-sets summary

Syntax

Description

Display service set summary information.

Options

none

Display service set summary information for all adaptive services interfaces.

interface interface-name

(Optional) Display service set summary information for a particular interface. On M Series and T Series routers, interface-name can be ms-fpc/pic/port, sp-fpc/pic/port, or rspnumber.

On MX Series MX240, MX480, and MX960 routers, interface-name can be vms-fpc/pic/port for the MX-SPC3 services card for Next Gen Services.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show services service-sets summary command. Output fields are listed in the approximate order in which they appear.

Table 1: show services service-sets summary Output Fields
Field Name	Field Description
`Interface`	Name of an adaptive services interface
`Service type`	Type of adaptive service, such as stateful firewall (SFW), Network Address Translation (NAT), intrusion detection service (IDS), Layer 2 Tunneling Protocol (L2TP), Compressed Real-Time Transport Protocol (CRTP), or IP Security (IPsec)
`Service sets configured`	Total number of service sets configured on the PIC that use internal service set IDs and do not consume external service sets, including CRTP and L2TP
`Bytes used`	Bytes used by a particular service or all services
`Policy bytes used`	Policy bytes used by a particular service or all services
`CPU utilization`	Percentage of the CPU resources being used

Sample Output

show services service-sets summary
show services service-sets summary interface