initiate-ncp (Dynamic and Static PPP)

Syntax

Hierarchy Level

Description

Configure PPP Network Control Protocol (NCP) negotiation mode (active or passive) for dynamic and static IPv4 and IPv6 PPP subscriber interfaces. You can also configure PPP NCP negotiation mode for the PPP server in an IPv4/IPv6 dual-stack configuration.

Options

dual-stack-passive	Enable passive PPP NCP negotiation for the PPP server in an IPv4/IPv6 dual-stack configuration. The `initiate-ncp dual-stack-passive` statement overrides the `initiate-ncp ip` and `initiate-ncp ipv6` statements if they are configured in an IPv4/IPv6 dual-stack configuration.
ip	Enable active PPP NCP negotiation for dynamic and static PPP subscriber interfaces configured with the IPv4 (`inet`) protocol address family, and for which IPv4 address attributes are assigned during authorization. By default, dynamic and static IPv4 subscriber interfaces use passive PPP NCP negotiation. In an IPv4/IPv6 dual-stack configuration, use the `initiate-ncp ip` statement to enable active PPP NCP negotiation for the IPv4 subscriber interface.
ipv6	Enable active PPP NCP negotiation for dynamic and static PPP subscriber interfaces configured with the IPv6 (`inet6`) protocol address family, and for which IPv6 address attributes are assigned during authorization. By default, dynamic and static IPv6 subscriber interfaces use passive PPP NCP negotiation. In an IPv4/IPv6 dual-stack configuration, use the `initiate-ncp ipv6` statement to enable active PPP NCP negotiation for the IPv6 subscriber interface.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 14.1.

ON THIS PAGE