Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

clear services l2tp tunnel

Syntax

Description

(M10i and M7i routers: LNS only. MX Series routers: LAC and LNS.) Clear Layer 2 Tunneling Protocol (L2TP) tunnels.

Note:

On MX Series routers, you cannot issue the clear services l2tp tunnel command in parallel with statistics-related show services l2tp commands from separate terminals. If this clear command is running, then you must press Ctrl+c to make the command run in the background before issuing any of the show commands listed in the following table:

show services l2tp destination extensive

show services l2tp summary statistics

show services l2tp destination statistics

show services l2tp tunnel extensive

show services l2tp session extensive

show services l2tp tunnel statistics

show services l2tp session statistics

Options

all

Clear all L2TP tunnels.

Best Practice:

The all option is not intended to be used as a means to perform a bulk logout of L2TP subscribers. We recommend that you do not use the all option in a production environment. Instead of clearing all subscribers at once, consider clearing subscribers in smaller group, based on interface, tunnel, or destination end point.
sp-fpc/pic/port

(Optional) Clear only the L2TP tunnels using the specified adaptive services interface. This option is not available for L2TP on MX Series routers.
local-gateway gateway-address

Clear only the L2TP tunnels associated with the local gateway with the specified address.
local-gateway-name gateway-name

Clear only the L2TP tunnels associated with the local gateway with the specified name.

local-tunnel-id tunnel-id

Clear only the L2TP tunnels that have the specified local tunnel identifier.

peer-gateway gateway-address

Clear only the L2TP tunnels associated with the peer gateway with the specified address.
peer-gateway-name gateway-name

Clear only the L2TP tunnels associated with the peer gateway with the specified name.
tunnel-group group-name

Clear only the L2TP tunnels in the specified tunnel group. This option is not available for L2TP LAC on MX Series routers.

Required Privilege Level

view

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

clear services l2tp tunnel

Release Information

Command introduced before Junos OS Release 7.4.

Support for LAC on MX Series routers introduced in Junos OS Release 10.4.

Support for LNS on MX Series routers introduced in Junos OS Release 11.4.

Related Documentation