show interfaces anchor-group (Aggregated Packet Forwarding Engine)
Syntax
show interfaces anchor-group
<brief | detail>
interface-name
Description
Display interface information for the aggregated Packet Forwarding Engine group.
Options
| none | (Same as brief) Display a summary of the aggregated Packet Forwarding Engine interface information. |
| brief | detail | (Optional) Display the specified level of output. |
| interface-name | Name of the interface within the anchor Packet Forwarding Engine group. Note:
The interface must be an aggregated Packet Forwarding Engine interface (apfe-). |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show interfaces anchor-group command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
|
Anchor Packet Forwarding Engine is operational. |
All levels |
|
Anchor Packet Forwarding Engine is not operational. |
All levels |
|
Primary Packet Forwarding Engine anchor has failed. |
All levels |
|
Primary Packet Forwarding Engine is protected by a secondary Packet Forwarding Engine in manually switched mode for primary role change. |
All levels |
|
Primary Packet Forwarding Engine is protected by a secondary Packet Forwarding Engine in hot standby mode. |
All levels |
|
Primary Packet Forwarding Engine is protected by a secondary Packet Forwarding Engine in warm standby mode. |
All levels |
|
Name of the aggregated Packet Forwarding Engine group. |
|
|
Redundancy mode in which the aggregated Packet Forwarding Engine group operates. Currently, only warm standby mode is supported. |
|
|
Redundancy subgroups within the anchor Packet Forwarding Engine group configuration that has FPCs as members. This is derived out of the Packet Forwarding Engines on a given FPC. For example, if the first Packet Forwarding Engine is assigned the number 0, then all the other Packet Forwarding Engines with sub-group ID 0 form the N:1 redundancy group. |
|
|
Anchor Packet Forwarding Engine interface ( |
All levels |
|
State in which the anchor Packet Forwarding Engine was configured.
|
All levels |
|
Indication whether the anchor Packet Forwarding Engine
is operational ( |
All levels |
|
Redundancy state (primary or secondary) in which the anchor Packet Forwarding Engine was configured. |
All levels |
|
Name of the aggregated Packet Forwarding Engine group. |
|
|
Redundancy mode in which the aggregated Packet Forwarding Engine group operates. Currently, only warm standby mode is supported. |
|
|
Internal ID generated for the group. |
|
|
Switchover details, if any. |
|
|
Number of redundancy subgroups within the anchor Packet Forwarding Engine group configuration that has FPCs as members. This is derived out of the Packet Forwarding Engines on a given FPC. For example, if the first Packet Forwarding Engine is assigned the number 0, then all the other Packet Forwarding Engines with subgroup ID 0 form the N:1 redundancy group. |
|
Sample Output
show interfaces anchor-group brief
user@host> show interfaces anchor-group brief
Redundancy Status Legend:
Active: Operational Inactive: Non-operational
MS: Manually switched PF: Primary failed
HS: Hot standby WS: Warm standby
Group Mode Sub-group Interface Configured Operational Redundancy
ID State State State
apfe0 WS 0 pfe-4/0/0 Primary Active Primary
pfe-5/0/0 Secondary Active Secondary
2 pfe-4/2/0 Primary Active Primary
pfe-5/2/0 Secondary Active Secondary
show interfaces anchor-group detail
user@host> show interfaces anchor-group detail
Active: Operational Inactive: Non-operational
MS: Manually switched PF: Primary failed
HS: Hot standby WS: Warm standby
Group Name: apfe0
Group Mode: WS Group Id: 65
Switchover information: None
Interface pfe-4/2/0
Configured state: Primary Operational state: Active
Redundancy state: Primary
Subgroup identifier: 2
Interface pfe-4/0/0
Configured state: Primary Operational state: Active
Redundancy state: Primary
Subgroup identifier: 0
Interface pfe-5/0/0
Configured state: Secondary Operational state: Active
Redundancy state: Secondary
Subgroup identifier: 0
Interface pfe-5/2/0
Configured state: Secondary Operational state: Active
Redundancy state: Secondary
Subgroup identifier: 2
Release Information
Statement introduced in Junos OS Release 17.1.