request interface load-balancing switchover (Aggregated Multiservices)
Syntax
request interface load-balancing switchover interface-name<force>
Description
Switch the active member interface to the backup state.
In the case of mobile control plane redundancy, the behavior depends on the replication state of the member interface:
If the sync state is
in-sync, then the active member is rebooted and the backup member becomes the new active member.If the sync-state is
in-progress, then theforceoption must be used to force the switchover.CAUTION:In this case, there is a risk of losing subscriber information because the synchronization has not yet been completed.
Options
| interface-name | Name of the member interface. The member interface format is mams-a/b/0, where a is the FPC slot number and b is the PIC slot number. |
| force | (Optional) Force the switchover from the active member to the backup member. |
Required Privilege Level
view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface load-balancing switchover force
user@host> request interface load-balancing switchover force mams-4/0/0 Switchover Initiated
Release Information
Statement introduced in Junos OS Release 17.1.