Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

show ddos-protection statistics

Syntax

Description

Display DDoS protection global statistics for bandwidth violations.

Options

This command has no options.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show ddos-protection statistics command. Output fields are listed in the approximate order in which they appear.

Table 1: show ddos-protection statistics Output Fields

Field Name

Field Description

Policing on routing engine

Shows whether or not policing is enabled on the Routing Engine.

Policing on FPC

Shows whether or not policing is enabled on the line card.

Flow detection

Shows whether or not flow detection in enabled.

Logging

Shows whether or not DDoS event logging is enabled.

Policer violation report rate

Shows the violation report rate as a percentage.

Flow report rate

Shows the flow report rate as a percentage.

Default flow detection mode

Flow detection and tracking mode configured at the global level for all protocol groups and packet types.

Default flow level detection mode

Flow detection and tracking mode configured at the flow aggregation level for all protocol groups and packet types.

Default flow level control mode

Default behavior configured for how traffic in detected flows is controlled for all protocol groups and packet types.

Currently violated packet types

Number of packet types currently experiencing a bandwidth violation.

Packet types have seen violations

Number of packet types that have experienced a bandwidth violation since statistics were cleared.

Total violation counts

Total number of bandwidth violations.

Sample Output

show ddos-protection statistics

Release Information

Command introduced in Junos OS Release 11.2.

Related Documentation