color-blind
Syntax
color-blind;
Hierarchy Level
[edit firewall three-color-policer policer-name single-rate], [edit firewall three-color-policer policer-name two-rate]
Description
Configure the way preclassified packets are metered. In color-blind mode, the switch ignores any preclassification of packets and can assign a higher or lower packet loss priority (PLP). For example, suppose an upstream device assigns medium-high PLP to a packet because the packet exceeded the CIR on the upstream device. The switch can change the PLP to low if the packet conforms to the CIR of the appropriate interface.
Default
If you omit the color-blind
statement, the default behavior is color-aware
mode.
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.