clear interfaces statistics
Syntax
clear interfaces statistics (all | interface-name)
Description
Set interface statistics to zero. If you issue the clear interfaces
statistics interface-name command and then perform a
graceful Routing Engine switchover, the interface statistics are not cleared on the
new primary node. Reissue the command to clear the interface statistics again.
Starting in Junos OS Release 17.3R1, this command supports the clearing of Packet
Forwarding Engine accounting statistics on logical interfaces configured with
accounting options. On these interfaces, the current statistics values are stored as
the new current baseline values and then the counters are reset to zero. If the
allow-clear statement is included in the interface profile,
then the cleared statistics values are reported to the accounting options flat file
associated with the interface. Reporting is disabled by default; if
allow-clear is not configured, then the CLI displays cleared
statistics counters, but they are not reported to the flat file.
Starting in Junos OS Release 19.1R1, this command supports the clearing of unicast Reverse Path Forwarding (RPF) statistics.
Starting in Junos OS Release 21.3R1, on MX Series Routers, this command supports the clearing of Reverse Path Forwarding (RPF) statistics of the Ethernet interfaces.
Options
| all | Set statistics on all interfaces to zero. |
| interface-name | Set statistics on a particular interface to zero. |
Required Privilege Level
clear
Output Fields
When you enter this command, you are provided no feedback on the status of your request.
Sample Output
clear interfaces statistics
user@host> clear interfaces statistics
Release Information
Command introduced before Junos OS Release 7.4.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.