clear firewall
Syntax
clear firewall (all | counter counter-name | filter filter-name | log (all | logical-system-name ) | logical-system logical-system-name)
Syntax (EX Series Switches)
clear firewall (all | counter counter-name | filter filter-name | log (all | logical-system-name) | policer counter (all | counter-id counter-index))
Description
Clear statistics about configured firewall filters.
When you clear the counters of a filter, this impacts not only the counters shown by the CLI, but also the ones tracked by SNMP2.
Subscriber management uses firewall filters to capture and report
the volume-based service accounting counters that are used for subscriber
billing. The clear firewall
command also clears the service
accounting counters that are reported to the RADIUS accounting server.
For this reason, you must be cautious in specifying which firewall
statistics you want to clear.
The clear firewall
command cannot be used to
clear the Routing Engine filter counters on a backup Routing Engine
that is enabled for graceful Routing Engine switchover (GRES).
If you clear statistics for firewall filters that are applied
to Trio-based DPCs and that also use the prefix-action
action
on matched packets, wait at least 5 seconds before you enter
the show firewall prefix-action-stats
command. A 5-second
pause between issuing the clear firewall
and show
firewall prefix-action-stats
commands avoids a possible timeout
of the show firewall prefix-action-stats
command.
Options
all | Clear the packet and byte counts for all filters. On EX Series switches, this option also clears the packet counts for all policer counters. |
counter counter-name | Clear the packet and byte counts for a filter counter that has been configured with the counter firewall filter action. |
filter filter-name | Clear the packet and byte counts for the specified firewall filter. |
log (all | logical-system-name) | Clear log entries for IPv4 firewall filters
that have |
logical-system logical-system-name | Clear the packet and byte counts for the specified logical system. |
policer counter (all | counter-id counter-index) | (EX8200 switches only) Clear all policer
counters using the |
Required Privilege Level
clear
Sample Output
- clear firewall all
- clear firewall (counter counter-name)
- clear firewall (filter filter-name)
- clear firewall (policer counter all) (EX8200 Switch)
- clear firewall (policer counter counter-id counter-index) (EX8200 Switch)
clear firewall all
user@host> clear firewall all
clear firewall (counter counter-name)
user@host> clear firewall counter port-filter-counter
clear firewall (filter filter-name)
user@host> clear firewall filter ingress-port-filter
clear firewall (policer counter all) (EX8200 Switch)
user@switch> clear firewall policer counter all
clear firewall (policer counter counter-id counter-index) (EX8200 Switch)
user@switch> clear firewall policer counter counter-id 0
Release Information
Command introduced before Junos OS Release 7.4.
logical-system
option introduced in Junos OS Release
9.3.
log
option introduced before Junos OS Release 11.4.