show validation group
Syntax
show validation group <instance instance-name> <logical-system logical-system-name>
Description
Display information about route validation redundancy groups.
Options
| none | Display information about all route validation groups. |
| instance instance-name | (Optional) Display information about route validation groups for the specified routing instance. The instance name can be primary for the main instance, or any valid configured instance name or its prefix. |
| logical-system logical-system-name | (Optional) Perform this operation on a particular logical system. |
Required Privilege Level
view
Output Fields
Table 1 describes the output fields for the show validation group command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
Group |
Group name. |
Maximum sessions |
Number of concurrent sessions for
each group. The default is 2. The number is configured with the |
Session |
Resource public key infrastructure (RPKI) cache session IP address. |
State |
State of the connection between
the routing device and the cache server. |
Preference |
Each cache server has a preference. Higher preferences are preferred. During a session start or restart, the routing device attempts to start a session with the cache server that has the numerically highest preference. The routing device connects to multiple cache servers in preference order. The default preference is 100. The preference value is configured
with the |
Sample Output
show validation group
user@host> show validation group
master
Group: test, Maximum sessions: 3
Session 10.255.255.11, State: Up, Preference: 100
Session 10.255.255.12, State: Up, Preference: 100
Group: test2, Maximum sessions: 2
Session 10.255.255.13, State: Connect, Preference: 100Release Information
Command introduced in Junos OS Release 12.2.