authentication-type (Protocols RIP)
Syntax
authentication-type type;
Hierarchy Level
[edit logical-systems logical-system-name protocols rip], [edit logical-systems logical-system-name protocols rip group group-name neighbor neighbor-name], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols rip], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols rip group group-name neighbor neighbor-name], [edit protocols rip], [edit protocols rip group group-name neighbor neighbor-name], [edit routing-instances routing-instance-name protocols rip], [edit routing-instances routing-instance-name protocols rip group group-name neighbor neighbor-name]
Description
Configure the type of authentication for RIP route queries received on an interface.
Default
If you do not include this statement and the authentication-key statement, RIP authentication is disabled.
Options
type—Authentication
type:
md5—Use the MD5 algorithm to create an encoded checksum of the packet. The encoded checksum is included in the transmitted packet. The receiving routing device uses the authentication key to verify the packet, discarding it if the digest does not match. This algorithm provides a more secure authentication scheme.
none—Disable authentication. Ifnoneis configured, the configured authentication key is ignored.
simple—Use a simple password. The password is included in the transmitted packet, which makes this method of authentication relatively insecure. The password can be from 1 through 16 contiguous letters or digits long.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.