Resolved Issues

Learn about the issues fixed in this release for ACX Series routers.

For the most complete and latest information about known Junos OS defects, use the Juniper Networks online Junos Problem Report Search application.

General Routing

[ACX7000 Series] DHCPv4/v6 packets may be dropped because DHCP packets are not routed to kernel after initial jdhcpd starts. PR1816246
Serial Console Stops Working After Cable Reconnection. PR1838074
Virtual port configuration not supported in ACX710. PR1840387
Packets are forwarded with native VLAN tagged on ACX5448 and ACX710 platforms. PR1849241
Inner VLAN tag DEI bit in VLAN header set . PR1850907
The l2ald process crash is observed when same Type 5 MAC-IP received with same IP and different MAC. PR1852019
EVPN/VPLS protocol configuration through CLI is not allowed on device. PR1852905
Esi link state change causing bum traffic block. PR1853321
IPv6 neighbor discovery with DHCP packet getting dropped when no-snoop option is enabled for DHCP Relay. PR1855624
Layer 2 and layer 3 packet loss and bulk of syslog messages reported in MPLS scenarios. PR1859990
The authd process crashes when /etc/resolv.conf file is empty. PR1860913
The syslog message "RPD_DYN_CFG_SMID_REG_FAILED: Failed to open session database: -1" pops every 5 seconds. PR1865702
The rpd process crashes and asserts are seen due to memory leak. PR1868085
Transient traffic loss for CE in an EVPN MPLS setup with Multi-Homing. PR1874476