Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Resolved Issues

Learn about the issues fixed in this release for NFX Series.

For the most complete and latest information about known Junos OS defects, use the Juniper Networks online Junos Problem Report Search application.

VNF

  • On NFX350 device, in flex mode, traceoptions consume memory which causes IKE (Internet Key Exchange) SAs (Security Associations) tunnel to be down for IPv6 with IKEv1. Enable selective traceoptions to allow other components to work with limited memory.PR1832087.

General Routing

  • On the NFX platforms, to map the front panel L2 interfaces to a single L3 interface you can run the set vmhost virtualization-options interfaces L3-interface-name mapping fail-on-any-peer command. However, the user can map the interfaces by using the set vmhost virtualization-options interfaces L3-interface-name mapping peer-interface command too. Although this latter method is not according to design, it does not affect any traffic. PR1861770.

  • When you configure the security policies on the NFX devices using the CLI, [edit security policies from-zone trust to-zone untrust policy <policy-name> match application], the default application, junos-vxlan now appears in the application list. PR1870006.