Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Software Installation and Upgrade

  • Firmware upgrade support (QFX5130-48C)—Starting in Junos OS Evolved Release 23.4R2, the QFX5130-48C switch supports the following firmware-upgrade commands:

    • request system firmware upgrade fpc slot 0 bcm-pfe

    • request system firmware upgrade fpc slot 0 dpll

    • request system firmware upgrade fpc slot 0 dpll-cfg

    • request system firmware upgrade fpc slot 0 opticscpld<0|1|2|3>

    • request system firmware upgrade psm slot <0|1>

    • request system firmware upgrade re bios

    • request system firmware upgrade re fancpld

    • request system firmware upgrade re fpga

    • request system firmware upgrade re i210

    • request system firmware upgrade re ssd <disk1|disk2>

    • request system firmware upgrade re xmcfpga

    [See request system firmware upgrade.]

  • Optimize reboot times by disabling default initialization and startup of certain L2 applications (QFX5130-32CD, QFX5130-48C, QFX5220, and QFX5700)—Starting in Junos OS Evolved Release 23.4R2, when rebooting the device, the Layer 2 (L2) applications l2ald, l2ald-agent, l2cpd, and l2cpd-agent are initialized and started only if any of the following configuration hierarchy levels contain any configuration statements:

    • [edit interface interface-name unit number family ethernet-switching]

    • [edit vlans]

    • [edit routing-instance instance-name instance-type virtual-switch]

    • [edit routing-instance instance-name instance-type mac-vrf]

    • [edit protocols l2-learning]

    Additionally, l2cpd, and l2cpd-agent are initialized and started if the [edit protocols lldp] hierarchy level contains any configuration statements.

    As a result of this change, if your configuration already contains these configuration statements and you then delete all of them, these L2 applications stop running.

    [See request node reboot (re0 | re1) (Junos OS Evolved), request system reboot (Junos OS Evolved), and request system software add (Junos OS Evolved).]