Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Additional Features

We've extended support for the following features to these platforms.

  • 1G CoS support (MX304). We support 1G class-of-service (Cos) on 1G ports.

    [See Port speed on MX304 Router Overview]

  • 1G firewall support (MX304). We support firewall for an 1G interface.

    [See Port speed on MX304 Router Overview]

  • Access Gateway Function Support (MX10008 with MX10K-LC2101 and MX10K-LC480).

    [See Access Gateway Function User Guide.]

  • BMP support for local (RIB) policy (cRPD). We've enhanced the BGP Monitoring Protocol (BMP) to monitor the local routing information base (RIB) loc-rib policy. We've added the loc-rib policy to the RIB types under the bmp route-monitoring statement.

    [See BGP Monitoring Tool, BMP Routing Options, and route-monitoring.]

  • Dynamic load balancing on ECMP and LAG (EX4400-24T, EX4400-24X, and EX-4400-48F).

    [See Dynamic Load Balancing.]

  • Ephemeral database support for configuring MSTP, RSTP, and VSTP (ACX Series, EX Series, and QFX Series). You can configure the following protocols in the ephemeral configuration database:

    • Multiple Spanning Tree Protocol (MSTP)

    • Rapid Spanning Tree Protocol (RSTP)

    • VLAN Spanning Tree Protocol (VSTP)

    [See Unsupported Configuration Statements in the Ephemeral Configuration Database.]

  • Filter-based GRE decapsulation (EX4100-24P, EX4100-24T, EX4100-24MP, EX4100-48P, EX4100-48T, EX4100-48MP, EX4400-24P, EX4400-24T, EX4400-24X, EX4400-24MP, EX4400-48P, EX4400-48F, and EX4400-48MP).

    [See Configuring a Firewall Filter to De-Encapsulate GRE Traffic.]

  • Firewall filter flexible match conditions (EX4100-24P, EX4100-24T, EX4100-24MP, EX4100-48P, EX4100-48T, EX4400-24T, EX4400-24X, and EX4400-48F). You can construct firewall filters that start the match at Layer 2 or Layer 3 packet offsets.

    [See Firewall Filter Flexible Match Conditions.]

  • Interoperability of segment routing with LDP (cRPD). You can use OSPF or IS-IS to enable segment routing devices to operate with the LDP devices that are not segment routing capability.

    [See Mapping Server for Segement Routing and mapping-server-entry.]

  • IP liveness detection and IP session monitoring for DHCP BBE subscribers using asynchronous single-hop (UDP Port 3784) and multi-hop (UDP Port 4784) BFD (MX Series).

    [See DHCP Liveness Detection and show bfd session]

  • Remote port mirroring to an IPv6 address (GRE) (EX4100-24P, EX4100-24T, EX4100-24MP, EX4100-48P, EX4100-48T, EX4100-48MP, EX4400-24P, EX4400-24T, EX4400-24X, EX4400-24MP, EX4400-48P, EX4400-48T, EX4400-48F, and EX4400-48MP).

    [See Port Mirroring and Analyzers (Network Management and Monitoring Guide).]

  • Remote port mirroring with VXLAN encapsulation (EX4400-24T, EX4400-24X, and EX4400-48F).

    [See Port Mirroring and Analyzers (EVPN User Guide).]

  • Resilient hashing support for LAGs and ECMP groups (EX4400-24X and EX4400-48F).

    [See Resilient Hashing on LAGs and ECMP Groups.]

  • Seamless EVPN-VXLAN stitching (QFX10002-36Q, QFX10002-72Q, QFX10008, and QFX10016). We support the seamless stitching of unicast, broadcast, and unknown unicast routes.

  • Segment routing–traffic engineering (SR-TE) colored policy RIB5 and SR-TE colored telemetry sensor support (MX10004, MX10008, and vMX).

    [See Schema Explorer.]

  • Support for DHCP smart relay in an Ethernet VPN–Virtual Extensible LAN (EVPN-VXLAN) deployment (EX4400-24X).

    [See DHCP Smart Relay in EVPN-VXLAN.]

  • Support for firewall filter lists - input-list and output-list (EX Series).

    [See input-list and output-list.]

  • Support for processing firewall filters at the Packet Forwarding Engine NPU level (SRX4600, SRX5400, SRX5600, and SRX5800).

    Note:

    This feature is supported only when you configure the enhanced-mode knobunder the filter.

    [See enhanced-mode.]

  • Support for port-based LAN broadcast traffic forwarding (EX4100-24P, EX4300-MP, EX4400-24MP, EX4400-24P, EX4400-24T, EX4400-48F, EX4400-48MP, EX4400-48P, and EX4400-48T).

    [See Configuring Port-based LAN Broadcast Packet Forwarding.]

  • Support for PTP G.8275.1 and Timing G.8275.1 over LAG interfaces (MX304). We support the Precision Time Protocol (PTP) G.8275.1 and Timing G.8275.1 over LAG interfaces.

    [See Understanding the Time Management Administration Guide and profile-type]

  • View supported transceivers, optical interfaces, and DAC cables(EX4400-24X). Select your product in the Hardware Compatibility Tool to view the supported transceivers, optical interfaces, and direct attach copper (DAC) cables for your platform or interface module. We update the tool and provide the first supported release information when the optic becomes available.

  • View supported transceivers, optical interfaces, and DAC cables—Select your product in the Hardware Compatibility Tool (HCT) to view the supported transceivers, optical interfaces, and direct attach copper (DAC) cables for your platform or interface module. We update HCT and provide the first supported release information when the optic becomes available.

  • v4ov6 tunnel support for gateway functionality (MX304 with MPC10, MPC11, and LC9600 line cards).

    [See Understanding Redistribution of IPv4 Routes with IPv6 Next Hop into BGPveness Detection]