Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Additional Features

We have extended support for the following features to the platforms shown in parentheses:

  • MVPN support for MLAN, PIM-DIM, and type 7 withdrawal on stream threshold (sharding and non-sharding) (PTX10001-36MR, PTX10003, PTX10004, PTX10008, QFX5130-32CD, and QFX5700). We support MVPN for MLAN, PIM-DIM, and type 7 withdrawal on stream threshold.

    [See source-active-advertisement, rib-sharding, and show mvpn c-multicast.]

  • Prevent script execution based on current system memory usage (ACX7024, ACX7100-32C, ACX7100-48L, ACX7509, PTX10001-36MR, PTX10003, PTX10004, PTX10008, PTX10016, QFX5130-32CD, QFX5220, and QFX5700). You can configure the system memory usage threshold above which the device prevents the execution of certain op, event, SNMP, or Juniper Extension Toolkit (JET) scripts. [See Configure Script Start Options.]

  • Real-time Performance Monitoring (RPM) IPv6 source and target address support (ACX7024, ACX7100, ACX7509, PTX10001-36MR, PTX10003, PTX10004, PTX10008, PTX10016, QFX5130-32CD, QFX5220, and QFX5700). You can configure IPv6 source and target addresses for RPM. We've also added support for IPv6 addresses to the SNMP RFC2925a MIB control and results tables. For IPv6 RPM probes, you can enable timestamps only in the Routing Engine.

    [See source-address and target.]

  • Support for fan module replacement related alarms and temperature-based system shutdown (QFX5230-64CD).

    [See How to Configure Flexible Algorithms in IS-IS for Segment Routing Traffic Engineering

    and BGP Link-State Extensions for Source Packet Routing in Networking (SPRING).]

  • Support for remote authorization on tacplus servers for locally certificate-based authenticated users (ACX7100-32C, ACX7100-48L, ACX7509, ACX7024, PTX10001-36MR, PTX10003, PTX10004, PTX10008, PTX10016, QFX5130-32CD, QFX5700, and QFX5220). We support remote authorization on TACPLUS servers for locally authenticated users by using certificate-based authentication.

    Note:

    You must configure the password under authentication-order when password-options is configured. The feature does not work in a local fallback scenario, because the password is not configured under authentication-order for a local fallback scenario.

    To configure remote authorization, include the tacplus-authorization option under the password-options configuration statement at the [edit system] hierarchy level.

    [See password-options.]