MPLS
- OAM support for labeled IS-IS and labeled OSPF
flexible algorithm SR paths (PTX10001-36MR, PTX10003, PTX10004, PTX10008, QFX5130-32CD,
and QFX5220)—Starting in Junos OS Evolved Release 23.1R1, Junos OS supports the
following Operation, Administration, and Maintenance (OAM) capabilities for labeled IS-IS
Flexible Algorithm (flex algo) segment routing paths:
-
IPv4 and IPv6 MPLS ping
-
IPv4 and IPv6 MPLS traceroute
-
Equal-cost multipath (ECMP) traceroute
Junos OS Evolved also supports IPv4 MPLS ping and IPv4 MPLS traceroute for labeled OSPF flex algo segment routing paths. The OAM functionality is used to detect data plane failures in segment routing paths for the purposes of fault detection and isolation.
To enable these OAM capabilities, we've introduced the
algorithm
option in the following commands:-
ping mpls segment routing isis fec algorithm algorithm-id
-
ping mpls segment routing ospf fec algorithm algorithm-id
-
traceroute mpls segment routing isis fec algorithm algorithm-id
-
traceroute mpls segment routing ospf fec algorithm algorithm-id
[See ping mpls segment routing isis, ping mpls segment routing ospf, traceroute mpls segment-routing ospf, and traceroute mpls segment-routing isis.]
-
-
Include IGP metric to RSVP routes using conditional metric (MX10004, MX10008, MX10016, PTX1000, PTX10002, PTX10008, and PTX10016)—Starting in Junos OS Evolved Release 23.1R1, you can include the IGP metric to RSVP routes that use the conditional metric. Including the IGP metric helps to preserve its value for use in certain use cases, such as in calculating the BGP MED.
[See Preserving the IGP metric in RSVP LSP routes and include-igp-metricinclude-igp-metric.]
-
Support to report path optimization and computed metrics in PCEP (PTX10001-36MR, PTX10003, PTX10004, PTX10008, PTX10016, QFX5130-32CD, QFX5220, QFX5230-64CD, and QFX5700)—Starting in Junos OS Evolved Release 23.1R1, we report PCEP path optimization metrics (
IGP
,TE
, anddelay
) and computed metrics for RSVP and segment routing–traffic engineering (SR-TE) label-switched paths (LSPs).To configure the interior gateway protocol (IGP), traffic engineering, and path delay optimization metrics for RSVP LSPs, include the
metric-type igp|te|delay|delay minimum
CLI statement at the[edit protocols mpls label-switched-path lsp-name]
hierarchy level.To configure the optimization metrics for SR-TE LSPs, include the
metric-type igp|te|delay|delay minimum
CLI statement at the[edit protocols source-packet-routing compute-profile compute-profile-name]
hierarchy level.