Migration, Upgrade, and Downgrade Instructions
This section contains information about how to upgrade Junos OS for vSRX using the CLI. Upgrading or downgrading Junos OS can take several hours, depending on the size and configuration of the network.
You also can upgrade to Junos OS Release 22.4R1 for vSRX using J-Web (see J-Web) or the Junos Space Network Management Platform (see Junos Space).
Direct upgrade of vSRX from Junos OS 15.1X49 Releases to Junos OS Releases 17.4, 18.1, 18.2, 18.3,18.4, 19.1, 19.2 and 19.4 is supported.
The following limitations apply:
-
Direct upgrade of vSRX from Junos OS 15.1X49 Releases to Junos OS Release 19.3 and higher is not supported. For upgrade between other combinations of Junos OS Releases in vSRX and vSRX 3.0, the general Junos OS upgrade policy applies.
-
The file system mounted on /var usage must be below 14% of capacity.
Check this using the following command:
show system storage | match " /var$" /dev/vtbd1s1f
2.7G 82M 2.4G 3% /varUsing the
request system storage cleanup
command might help reach that percentage. -
The Junos OS upgrade image must be placed in the directory /var/host-mnt/var/tmp/. Use the
request system software add /var/host-mnt/var/tmp/<upgrade_image>
-
We recommend that you deploy a new vSRX virtual machine (VM) instead of performing a Junos OS upgrade. That also gives you the option to move from vSRX to the newer and more recommended vSRX 3.0.
-
Ensure to back up valuable items such as configurations, license-keys, certificates, and other files that you would like to keep.
For ESXi deployments, the firmware upgrade from Junos OS Release 15.1X49-Dxx to Junos OS releases 17.x, 18.x, or 19.x is not recommended if there are more than three network adapters on the 15.1X49-Dxx vSRX instance. If there are more than three network adapters and you want to upgrade, then we recommend that you either delete all the additional network adapters and add the network adapters after the upgrade or deploy a new vSRX instance on the targeted OS version.
Upgrading Software Packages
To upgrade the software using the CLI:
-
Download the Junos OS Release 22.4R1 for vSRX .tgz file from the Juniper Networks website. Note the size of the software image.
-
Verify that you have enough free disk space on the vSRX instance to upload the new software image.
root@vsrx> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/vtbd0s1a 694M 433M 206M 68% / devfs 1.0K 1.0K 0B 100% /dev /dev/md0 1.3G 1.3G 0B 100% /junos /cf 694M 433M 206M 68% /junos/cf devfs 1.0K 1.0K 0B 100% /junos/dev/ procfs 4.0K 4.0K 0B 100% /proc /dev/vtbd1s1e 302M 22K 278M 0% /config /dev/vtbd1s1f 2.7G 69M 2.4G 3% /var /dev/vtbd3s2 91M 782K 91M 1% /var/host /dev/md1 302M 1.9M 276M 1% /mfs /var/jail 2.7G 69M 2.4G 3% /jail/var /var/jails/rest-api 2.7G 69M 2.4G 3% /web-api/var /var/log 2.7G 69M 2.4G 3% /jail/var/log devfs 1.0K 1.0K 0B 100% /jail/dev 192.168.1.1:/var/tmp/corefiles 4.5G 125M 4.1G 3% /var/crash/corefiles 192.168.1.1:/var/volatile 1.9G 4.0K 1.9G 0% /var/log/host 192.168.1.1:/var/log 4.5G 125M 4.1G 3% /var/log/hostlogs 192.168.1.1:/var/traffic-log 4.5G 125M 4.1G 3% /var/traffic-log 192.168.1.1:/var/local 4.5G 125M 4.1G 3% /var/db/host 192.168.1.1:/var/db/aamwd 4.5G 125M 4.1G 3% /var/db/aamwd 192.168.1.1:/var/db/secinteld 4.5G 125M 4.1G 3% /var/db/secinteld
-
Optionally, free up more disk space, if needed, to upload the image.
root@vsrx> request system storage cleanup List of files to delete: Size Date Name 11B Sep 25 14:15 /var/jail/tmp/alarmd.ts 259.7K Sep 25 14:11 /var/log/hostlogs/vjunos0.log.1.gz 494B Sep 25 14:15 /var/log/interactive-commands.0.gz 20.4K Sep 25 14:15 /var/log/messages.0.gz 27B Sep 25 14:15 /var/log/wtmp.0.gz 27B Sep 25 14:14 /var/log/wtmp.1.gz 3027B Sep 25 14:13 /var/tmp/BSD.var.dist 0B Sep 25 14:14 /var/tmp/LOCK_FILE 666B Sep 25 14:14 /var/tmp/appidd_trace_debug 0B Sep 25 14:14 /var/tmp/eedebug_bin_file 34B Sep 25 14:14 /var/tmp/gksdchk.log 46B Sep 25 14:14 /var/tmp/kmdchk.log 57B Sep 25 14:14 /var/tmp/krt_rpf_filter.txt 42B Sep 25 14:13 /var/tmp/pfe_debug_commands 0B Sep 25 14:14 /var/tmp/pkg_cleanup.log.err 30B Sep 25 14:14 /var/tmp/policy_status 0B Sep 25 14:14 /var/tmp/rtsdb/if-rtsdb Delete these files ? [yes,no] (no) yes < output omitted>
Note:If this command does not free up enough disk space, see [SRX] Common and safe files to remove in order to increase available system storage for details on safe files you can manually remove from vSRX to free up disk space.
-
Use FTP, SCP, or a similar utility to upload the Junos OS Release 22.4R1 for vSRX .tgz file to /var/crash/corefiles/ on the local file system of your vSRX VM. For example:
root@vsrx>
file copy ftp://username:prompt@ftp.hostname.net/pathname/ junos-vsrx-x86-64-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE.tgz /var/crash/corefiles/
-
From operational mode, install the software upgrade package.
root@vsrx>
request system software add /var/crash/corefiles/junos-vsrx-x86-64-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE.tgz no-copy no-validate reboot
Verified junos-vsrx-x86-64-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE signed by PackageDevelopmentEc_2017 method ECDSA256+SHA256 THIS IS A SIGNED PACKAGE WARNING: This package will load JUNOS 20.4 software. WARNING: It will save JUNOS configuration files, and SSH keys WARNING: (if configured), but erase all other files and information WARNING: stored on this machine. It will attempt to preserve dumps WARNING: and log files, but this can not be guaranteed. This is the WARNING: pre-installation stage and all the software is loaded when WARNING: you reboot the system. Saving the config files ... Pushing Junos image package to the host... Installing /var/tmp/install-media-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE.tgz Extracting the package ... total 975372 -rw-r--r-- 1 30426 950 710337073 Oct 19 17:31 junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-app.tgz -rw-r--r-- 1 30426 950 288433266 Oct 19 17:31 junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-linux.tgz Setting up Junos host applications for installation ... ============================================ Host OS upgrade is FORCED Current Host OS version: 3.0.4 New Host OS version: 3.0.4 Min host OS version required for applications: 0.2.4 ============================================ Installing Host OS ... upgrade_platform: ------------------- upgrade_platform: Parameters passed: upgrade_platform: silent=0 upgrade_platform: package=/var/tmp/junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-linux.tgz upgrade_platform: clean install=0 upgrade_platform: clean upgrade=0 upgrade_platform: Need reboot after staging=0 upgrade_platform: ------------------- upgrade_platform: upgrade_platform: Checking input /var/tmp/junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-linux.tgz ... upgrade_platform: Input package /var/tmp/junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-linux.tgz is valid. upgrade_platform: Backing up boot assets.. cp: omitting directory '.' bzImage-intel-x86-64.bin: OK initramfs.cpio.gz: OK version.txt: OK initrd.cpio.gz: OK upgrade_platform: Checksum verified and OK... /boot upgrade_platform: Backup completed upgrade_platform: Staging the upgrade package - /var/tmp/junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-linux.tgz.. ./ ./bzImage-intel-x86-64.bin ./initramfs.cpio.gz ./upgrade_platform ./HOST_COMPAT_VERSION ./version.txt ./initrd.cpio.gz ./linux.checksum ./host-version bzImage-intel-x86-64.bin: OK initramfs.cpio.gz: OK version.txt: OK upgrade_platform: Checksum verified and OK... upgrade_platform: Staging of /var/tmp/junos-srx-mr-vsrx-20.4-2020-10-12.0_RELEASE_20.4_THROTTLE-linux.tgz completed upgrade_platform: System need *REBOOT* to complete the upgrade upgrade_platform: Run upgrade_platform with option -r | --rollback to rollback the upgrade Host OS upgrade staged. Reboot the system to complete installation! WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the WARNING: 'request system reboot' command when software installation is WARNING: complete. To abort the installation, do not reboot your system, WARNING: instead use the 'request system software rollback' WARNING: command as soon as this operation completes. NOTICE: 'pending' set will be activated at next reboot... Rebooting. Please wait ... shutdown: [pid 13050] Shutdown NOW! *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY Shutdown NOW! System shutdown time has arrived\x07\x07If no errors occur, Junos OS reboots automatically to complete the upgrade process. You have successfully upgraded to Junos OS Release 22.4R1 for vSRX.
Note:Starting in Junos OS Release 17.4R1, upon completion of the vSRX image upgrade, the original image is removed by default as part of the upgrade process.
-
Log in and use the
show version
command to verify the upgrade.--- JUNOS 20.4-2020-10-12.0_RELEASE_20.4_THROTTLE Kernel 64-bit JNPR-11.0-20171012.170745_fbsd- At least one package installed on this device has limited support. Run 'file show /etc/notices/unsupported.txt' for details. root@:~ # cli root> show version Model: vsrx Junos: 20.4-2020-10-12.0_RELEASE_20.4_THROTTLE JUNOS OS Kernel 64-bit [20171012.170745_fbsd-builder_stable_11] JUNOS OS libs [20171012.170745_fbsd-builder_stable_11] JUNOS OS runtime [20171012.170745_fbsd-builder_stable_11] JUNOS OS time zone information [20171012.170745_fbsd-builder_stable_11] JUNOS OS libs compat32 [20171012.170745_fbsd-builder_stable_11] JUNOS OS 32-bit compatibility [20171012.170745_fbsd-builder_stable_11] JUNOS py extensions [20171017.110007_ssd-builder_release_174_throttle] JUNOS py base [20171017.110007_ssd-builder_release_174_throttle] JUNOS OS vmguest [20171012.170745_fbsd-builder_stable_11] JUNOS OS crypto [20171012.170745_fbsd-builder_stable_11] JUNOS network stack and utilities [20171017.110007_ssd-builder_release_174_throttle] JUNOS libs [20171017.110007_ssd-builder_release_174_throttle] JUNOS libs compat32 [20171017.110007_ssd-builder_release_174_throttle] JUNOS runtime [20171017.110007_ssd-builder_release_174_throttle] JUNOS Web Management Platform Package [20171017.110007_ssd-builder_release_174_throttle] JUNOS srx libs compat32 [20171017.110007_ssd-builder_release_174_throttle] JUNOS srx runtime [20171017.110007_ssd-builder_release_174_throttle] JUNOS common platform support [20171017.110007_ssd-builder_release_174_throttle] JUNOS srx platform support [20171017.110007_ssd-builder_release_174_throttle] JUNOS mtx network modules [20171017.110007_ssd-builder_release_174_throttle] JUNOS modules [20171017.110007_ssd-builder_release_174_throttle] JUNOS srxtvp modules [20171017.110007_ssd-builder_release_174_throttle] JUNOS srxtvp libs [20171017.110007_ssd-builder_release_174_throttle] JUNOS srx libs [20171017.110007_ssd-builder_release_174_throttle] JUNOS srx Data Plane Crypto Support [20171017.110007_ssd-builder_release_174_throttle] JUNOS daemons [20171017.110007_ssd-builder_release_174_throttle] JUNOS srx daemons [20171017.110007_ssd-builder_release_174_throttle] JUNOS Online Documentation [20171017.110007_ssd-builder_release_174_throttle] JUNOS jail runtime [20171012.170745_fbsd-builder_stable_11] JUNOS FIPS mode utilities [20171017.110007_ssd-builder_release_174_throttle]
Validating the OVA Image
If you have downloaded a vSRX .ova image and need to validate it, see Validating the vSRX .ova File for VMware.
Note that only .ova (VMware platform) vSRX images can be validated. The .qcow2 vSRX images for use with KVM cannot be validated the same way. File checksums for all software images are, however, available on the download page.
Upgrade and Downgrade Support Policy for Junos OS Releases and Extended End-Of-Life Releases
We have two types of releases, standard EOL and EEOL:
-
Standard End of Life (EOL) releases have engineering support for twenty four months after the first general availability date and customer support for an additional six more months.
-
Extended End of Life (EEOL) releases have engineering support for thirty six months after the first general availability date and customer support for an additional six more months.
For both standard EOL and EEOL releases, you can upgrade to the next three subsequent releases or downgrade to the previous three releases. For example, you can upgrade from 20.4 to the next three releases – 21.1, 21.2 and 21.3 or downgrade to the previous three releases – 20.3, 20.2 and 20.1.
For EEOL releases only, you have an additional option - you can upgrade directly from one EEOL release to the next two subsequent EEOL releases, even if the target release is beyond the next three releases. Likewise, you can downgrade directly from one EEOL release to the previous two EEOL releases, even if the target release is beyond the previous three releases. For example, 20.4 is an EEOL release. Hence, you can upgrade from 20.4 to the next two EEOL releases – 21.2 and 21.4 or downgrade to the previous two EEOL releases – 20.2 and 19.4.
Release Type | End of Engineering (EOE) | End of Support (EOS) | Upgrade/Downgrade to subsequent 3 releases | Upgrade/Downgrade to subsequent 2 EEOL releases |
---|---|---|---|---|
Standard End of Life (EOL) | 24 months | End of Engineering + 6 months | Yes | No |
Extended End of Life (EEOL) | 36 months | End of Engineering + 6 months | Yes | Yes |
For more information about standard EOL and EEOL releases, see https://www.juniper.net/support/eol/junos.html.
For information about software installation and upgrade, see the Installation and Upgrade Guide.