ON THIS PAGE
Resolved Issues
Learn about the issues fixed in this release for PTX Series.
For the most complete and latest information about known Junos OS defects, use the Juniper Networks online Junos Problem Report Search application.
General Routing
-
Junos OS: The kernel will crash when certain USB devices are inserted (CVE-2023-28975). PR1638519
-
The user-defined speed does not take effect on the aggregated Ethernet interface in certain scenarios on Junos OS platforms. PR1649958
-
On PTX5000 platforms when a command is issued to power off an FPC, it gets stuck in the 'Announce Offline' state. PR1683562
-
SNMP: jnxOperatingDescr.1.1.0.0 returns blank, but jnxOperatingState.1.1.0.0 returns value. PR1683753
-
Type elem not added for INTEGRATED_CIRCUIT. PR1685676
-
Currently no alarm is raised when onchip memory exhausts on the PTX10008 based FPCs. PR1690289
-
On all Junos OS PTX3000 and PTX5000 devices, upgrading from older Junos OS to 20.2R1 or later release might trigger intermittent link flapping. PR1693367
-
When using the proprietary subscribe RPC for telemetry, the "isis/levels" keyword is missing from the jkey output for leaf lists. PR1698192
-
Traffic loss can be seen while switching between primary and fallback sessions in MACsec setup. PR1698687
-
Ports with QSA adapter are down. PR1709817
-
gNMI line card (PFE) sensor /junos/system/linecard/packet/usage/ may have packet drops (gNMI translator lookup failures). PR1711779
-
FPC memory leak will cause FPC crash. PR1712076
-
Traffic loop is seen due to incorrect root bridge ID. PR1717267
-
Convergence delay is seen when FPC is offlined under heavy traffic and scaled scenario. PR1719956
Routing Protocols
VPNs
-
The aggregated Ethernet interface will be down when you configure.
l2circuit-control-passthrough
. PR1699493