Resolved Issues

Learn about the issues fixed in this release for PTX Series.

General Routing

IS-IS adjacency is not coming up through TCC l2circuit. PR1590387
On Junos ACX/PTX/QFX platforms traffic blackholing might occur after interface flaps. PR1645488
The AE interface speed is not reflected correctly in certain scenarios on Junos platforms. PR1649958
IS-IS adjacency is not coming up through the Layer 2 domain. PR1663134
PCS errored blocks count increments on PTX3000/PTX5000 after Junos software upgrade. PR1669267
jsd memory leak and might lead jsd restart. PR1669426
Reporting-interval in show jvision sensor info is stuck at 65000 when configured reporting rate is changed from 65000 to 68000. PR1673476
The PFE process crashes from Junos OS Release 21.4R1 version onwards on VMhost platforms. PR1681532
On PTX5000 platforms when a command is issued to power off an FPC, it gets stuck in the 'Announce Offline' state. PR1683562
jnxOperatingDescr.1.1.0.0 returns blank, but jnxOperatingState.1.1.0.0 returns value. PR1683753
The rpd crash would be observed when two separate next-hops in rpd map to the same next-hop-index in the kernel. PR1686211
On all Junos PTX3000 and PTX5000, upgrading from older Junos to 20.2R1 or later release might trigger intermittent link flapping. PR1693367
jkey path changed under protocol/isis. "levels" is missing. PR1698192

The error severity of syslog message ted_client reset generated during commit is incorrect. PR1649565
CPU utilization of rpd process might reach 100% while reporting LSP states to pccd if the IS-IS update churn is high. PR1673348
In an LDP -> BGP LU stitching scenario, multiple LSPs will not be installed in the forwarding table, even if BGP Multipath and ECMP are enabled. PR1680574
In the RSVP-TE scenario, with Entropy label capability enabled during MBB issues handling Resv messages. PR1681403