Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Resolved Issues

Learn about the issues fixed in this release for PTX Series.

General Routing

  • IS-IS adjacency is not coming up through TCC l2circuit. PR1590387

  • The user-defined speed does not take effect on the aggregate Ethernet interface in certain scenarios on Junos platforms. PR1649958

  • IS-IS adjacency is not coming up through the Layer 2 domain. PR1663134

  • PCS errored blocks count increments on PTX3000 and PTX5000 after Junos OS software upgrade. PR1669267

  • The jsd memory leak and might lead jsd restart. PR1669426

  • Reporting-interval in show jvision sensor info is stuck at 65000 when configured reporting rate is changed from 65000 to 68000. PR1673476

  • Issue with eth-lldp-stop.sh after Junos OS upgrade performed in PTX5000(i40e-NVM). PR1675177

  • The Packet Forwarding Engine process crashes from 21.4R1 version onwards on VMhost platforms. PR1681532

  • EX SNMP: jnxOperatingDescr.1.1.0.0 returns blank, but jnxOperatingState.1.1.0.0 returns value. PR1683753

  • The rpd crash would be observed when two separate next-hops in rpd map to the same next-hop-index in the kernel. PR1686211

  • On all Junos PTX3000 and PTX5000, upgrading from older Junos OS to 20.2R1 or later release might trigger intermittent link flapping. PR1693367

MPLS

  • The error severity of syslog message ted_client reset generated during commit is incorrect. PR1649565

  • CPU utilization of rpd process might reach 100% while reporting LSP states to pccd if the IS-IS update churn is high. PR1673348

  • In the RSVP-TE scenario, with entropy label capability is enabled during MBB issues handling Resv Messages. PR1681403