Additional Features

We've extended support for the following features to these platforms.

• HQoS support is available on AE and MC-LAG (ACX5448)

  [See Understanding Hierarchical CoS for Subscriber Interfaces.]

• IS-IS sensor support for JTI (cRPD)

  [See Configuring a Junos Telemetry Interface Sensor (CLI Procedure) and Telemetry Sensor Explorer.]

• Juniper Secure Connect and NCP Exclusive Remote Access Client with iked process (SRX5000 line of devices with SPC3 and vSRX 3.0 running iked)

  [See Juniper Secure Connect and Remote Access VPNs with NCP Exclusive Remote Access Client.]

• MACsec with GRES and NSR on MPC7E-10G line cards (MX480)

  [See suspend-for and suspend-on-request.]

• MSDP support (PTX10001-36MR, PTX10004, and PTX10008)

  • Nonstop Active Routing (NSR) with MD5 authentication
  • MSDP peer authentication

  [See Understanding MSDP.]

• Precision Time Protocol (PTP) Society of Motion Picture and Television Engineers (SMPTE) media profile and the enterprise profile (QFX5120-48YM)

  [See Understanding the Precision Time Protocol Enterprise Profile and Understanding the PTP Media Profiles.]

• Precision Time Protocol (PTP) transparent clock (QFX5120-48YM)

  [See Understanding Transparent Clocks in Precision Time Protocol.]

• Precision Time Protocol (PTP) transparent clock (EX4400-24MP, EX4400-24P, and EX4400-48MP)

  [See Understanding Transparent Clocks in Precision Time Protocol.]

• RADIUS over TLS (RADsec)(MX5, MX10, MX40, MX80, MX104, MX150, MX204, MX240, MX480, MX960, MX2008, MX10003, MX10008, MX10016, and QFX5120-48YM)

  [See RADIUS over TLS.]

• RPM and TWAMP (QFX10000 line of switches)

  [See Understanding Using Probes for Real-Time Performance Monitoring and Understand Two-Way Active Measurement Protocol on Routers .]

• Seamless EVPN-VXLAN stitching (QFX10002-60C)

  [See interconnect.]

• SPRING support for SR-TE (ACX 710 and ACX 5448):
  • Segment routing policy to steer labeled or IP traffic at ingress routers.
  • Segment routing paths for a non-colored static label-switched path (LSP).
  • Color-based traffic steering of Layer 2 and Layer 3 VPN services.

    [See Segment Routing Traffic Engineering at BGP Ingress Peer Overview]

• Stateless source Network Prefix Translation for IPv6 (NPTv6) packets (MX Series routers with MPC10E and MX2K-MPC11E line cards.)

  The NPTv6 translator translates the source address prefix in such a way that the transport layer checksum of the packet does not need to be recomputed.

  [See Stateless Source Network Prefix Translation for IPv6.]

• Support for SRv6 and Layer 3 services over SRv6 in BGP (cRPD)

  [See Understanding SRv6 Network Programming and Layer 3 Services over SRv6 in BGP and Host Settings.]

• Support for OAM on SRv6 and TI-LFA backup path over SRv6 (MX Series with MPC10E and MPC11E line cards) You can perform OAM operations on segment routing with IPv6 data plane (SRv6). We also support topology-independent loop-free alternate (TI-LFA) backup path for SRv6 in an IS-IS network on the MPCs.

  [See ping srv6 and TI-LFA for SRv6.]

• Support for VPLS over GRE tunnels (MX Series routers with MPC10E line cards)

  [See Configuring Layer 2 Ethernet Services over GRE Tunnel Interfaces]

• Support for inline CCM, CFM, and scaling on MPC10E (MX240, MX480, MX960, MX2010, and MX2020) and MPC11E:

  • Inline CCM support on MPC10E and MPC11E.

  • Support for CFM on MPC10E and MPC11E.

  • In scaled mode, a CFM configuration can have 13,000 CCM sessions per MPC10E-10C-MRATE and MPC11E, and 26,000 for two (MPC10E-10C-MRATE, MPC10E-15C-MRATE, and MPC11E) line cards on the aggregated Ethernet interface.

  [See Inline Transmission Mode, Configuring Connectivity Fault Management (CFM).]

• TWAMP Light IPv6 addressing support (ACX710, ACX2000, ACX2100, ACX5448, MX5, MX10, MX40, MX80, MX104, MX150, MX204, MX240, MX304, MX480, MX960, MX2008, MX2010, MX2020, MX10008, MX10016, vMX, PTX1000, and PTX5000)

  [See Understand Two-Way Active Measurement Protocol on Routers.]