Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Additional Features

We've extended support for the following features to these platforms.

  • MACsec with GRES and NSR on MPC7E-10G line cards (MX480)

    [See suspend-for and suspend-on-request.]

  • RADIUS over TLS (RADsec)(MX5, MX10, MX40, MX80, MX104, MX150, MX204, MX240, MX480, MX960, MX2008, MX10003, MX10008, MX10016, and QFX5120-48YM)

    [See RADIUS over TLS.]

  • Stateless source Network Prefix Translation for IPv6 (NPTv6) packets (MX Series routers with MPC10E and MX2K-MPC11E line cards.)

    The NPTv6 translator translates the source address prefix in such a way that the transport layer checksum of the packet does not need to be recomputed.

    [See Stateless Source Network Prefix Translation for IPv6.]

  • Support for OAM on SRv6 and TI-LFA backup path over SRv6 (MX Series with MPC10E and MPC11E line cards) You can perform OAM operations on segment routing with IPv6 data plane (SRv6). We also support topology-independent loop-free alternate (TI-LFA) backup path for SRv6 in an IS-IS network on the MPCs.

    [See ping srv6 and TI-LFA for SRv6.]

  • Support for VPLS over GRE tunnels (MX Series routers with MPC10E line cards)

    [See Configuring Layer 2 Ethernet Services over GRE Tunnel Interfaces]

  • Support for inline CCM, CFM, and scaling on MPC10E (MX240, MX480, MX960, MX2010, and MX2020) and MPC11E:

    • Inline CCM support on MPC10E and MPC11E.

    • Support for CFM on MPC10E and MPC11E.

    • In scaled mode, a CFM configuration can have 13,000 CCM sessions per MPC10E-10C-MRATE and MPC11E, and 26,000 for two (MPC10E-10C-MRATE, MPC10E-15C-MRATE, and MPC11E) line cards on the aggregated Ethernet interface.

    [See Inline Transmission Mode, Configuring Connectivity Fault Management (CFM).]

  • TWAMP Light IPv6 addressing support (ACX710, ACX2000, ACX2100, ACX5448, MX5, MX10, MX40, MX80, MX104, MX150, MX204, MX240, MX304, MX480, MX960, MX2008, MX2010, MX2020, MX10008, MX10016, vMX, PTX1000, and PTX5000)

    [See Understand Two-Way Active Measurement Protocol on Routers.]